O-Ring Seal
Part number : OR-222X7-NBR70
Description
The O-Ring Seal with the reference OR-222X7-NBR70 has an inner diameter of 222 mm and a thickness of 7 mm. It is made of NBR.
How to read the reference of an o-ring?
You can find all the information you need about our products in our expert's advice, by clicking here Here
13 parts in stock
Added
Need help or advice?
02038.087.274
Description
The O-Ring Seal with the reference OR-222X7-NBR70 has an inner diameter of 222 mm and a thickness of 7 mm. It is made of NBR.
How to read the reference of an o-ring?
You can find all the information you need about our products in our expert's advice, by clicking here Here
Need help or advice?
02038.087.274
Brand | GEN |
---|---|
Inside diameter | 222 mm |
Thickness | 7 mm |
Material | NBR |
Type | OR |
Hardness | 70 s |
Weight | 36 g |
Packaging | 1 |
The O-Ring Seal with the reference OR-222X7-NBR70 has an inner diameter of 222 mm and a thickness of 7 mm. It is made of NBR.
How to read the reference of an O-ring?
Example:
OR-40X3-NBR90
Where
OR = product type (O-ring or O-ring seal)
40X3 = inside diameter X thickness
NBR = matter
90 = shore hardness
Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.What does the number mean at the end of the reference?
This is the indication of shore hardness. Shore hardness is a material hardness scale, usually between 70 and 90 for O-rings. The higher the number, the harder the material.
Difference between NBR, FPM, EPDM, MVQ?
These are the different types of rubber. Each material will be more or less suitable for a use. Refer to the following information: FOR OILS NBR = Nitrile = Butadiene rubber - Acrylonitrile
from -30°C to +120°C FPM = Viton = Fluorinated Rubber
from -20°C to +200°C MVQ = Silicone rubber
from -50°C to +210°C FOR HYDROCARBONS NBR = Nitrile = Butadiene rubber - Acrylonitrile
from -30°C to +120°C FPM = Viton = Fluorinated Rubber
from -20°C to +200°C FOR BRAKE FLUID EPDM = Ethylene Rubber - Propylene - Diene
from -40°C to +150°C FOR WATER EPDM = Ethylene Rubber - Propylene - Diene
from -40°C to +150°C FOR MORE DETAILS ON THE MATERIALS, THEIR STRENGTHS AND LIMITS OF USE, REFER TO THE COMPLETE DESCRIPTION ON THE SEALED SEARCH PAGEHow to choose the size of my O-ring?
An O-ring should not, in general, be too stretched. It is therefore preferable to take a dimension as close as possible to the groove diameter, if applicable.