Self aligning roller bearing 24064RRK30-AH24064-JTEKT

320 320 480 480 160 160

Part number : 24064RRK30-AH24064-JTEKT

JTEKT

Description

The Self Aligning Roller Bearing, known as 24064RRK30-AH24064-JTEKT JTEKT, has an inner diameter of 320 mm, an outer diameter of 480 mm and a thickness of 160 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

02038.087.274

Description

The Self Aligning Roller Bearing, known as 24064RRK30-AH24064-JTEKT JTEKT, has an inner diameter of 320 mm, an outer diameter of 480 mm and a thickness of 160 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

02038.087.274

TECHNICAL DATA
  • BRAND
  • N° EAN13
    3616060796011
  • INSIDE DIAMETER
    320  MM
  • OUTSIDE DIAMETER
    480  MM
  • THICKNESS
    160  MM
  • LIMITING SPEED
    590  RPM
  • DYNAMIC LOAD
    3020  KN
  • STATIC LOAD
    4920  KN
  • PACKAGING
    1
  • STANDARD
    No standard
Description

The Self Aligning Roller Bearing, known as 24064RRK30-AH24064-JTEKT JTEKT, has an inner diameter of 320 mm, an outer diameter of 480 mm and a thickness of 160 mm.

EXPERT ADVICE

What is a self aligning bearing?

A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment. These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings. Attention, there are 2 important variants: • The cylindrical bore bearing, which will be mounted directly on the shaft, in force
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.
The tapered bore is indicated by the letter "K" in the reference.

What does the letter "K" mean in the reference?

The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.

CUSTOMER REVIEWS