LOG IN BASKET BUSINESS SOLUTIONS BLOG
23220RZK-H2320X-KOYO
JTEKT

Self aligning roller bearing 23220RZK-H2320X-KOYO

90 90 180 180 60.3 60.3

Part number : 23220RZK-H2320X-JTEKT

JTEKT
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23220RZK-H2320X-KOYO JTEKT, has an inner diameter of 90 mm, an outer diameter of 180 mm and a thickness of 60.3 mm.

N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

02038.087.274

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23220RZK-H2320X-KOYO JTEKT, has an inner diameter of 90 mm, an outer diameter of 180 mm and a thickness of 60.3 mm.

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

02038.087.274

Trustpilot
TECHNICAL DATA
  • BRAND
    JTEKT
  • N° EAN13
    3616060789785
  • INSIDE DIAMETER
    90  MM
  • OUTSIDE DIAMETER
    180  MM
  • THICKNESS
    60.3  MM
  • LIMITING SPEED
    2600  RPM
  • DYNAMIC LOAD
    533  KN
  • STATIC LOAD
    629  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 23220RZK-H2320X-KOYO JTEKT, has an inner diameter of 90 mm, an outer diameter of 180 mm and a thickness of 60.3 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot