LOG IN BASKET BUSINESS SOLUTIONS
23044RK-H3044-JTEKT
JTEKT

Self aligning roller bearing 23044RK-H3044-JTEKT

200 200 340 340 90 90

Part number : 23044RK-H3044-JTEKT

JTEKT
Trustpilot

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23044RK-H3044-JTEKT JTEKT, has an inner diameter of 200 mm, an outer diameter of 340 mm and a thickness of 90 mm.

See data sheet
N/A

  8 to 10 days

product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

02038.087.274

Trustpilot

Description

The Self Aligning Roller Bearing, known as 23044RK-H3044-JTEKT JTEKT, has an inner diameter of 200 mm, an outer diameter of 340 mm and a thickness of 90 mm.

See data sheet
product_sheet product_sheet product_sheet
product_sheet_padlockSecure payment

Need help or advice?

02038.087.274

Trustpilot
TECHNICAL DATA
  • BRAND
    JTEKT
  • N° EAN13
    3616060791467
  • INSIDE DIAMETER
    200  MM
  • OUTSIDE DIAMETER
    340  MM
  • THICKNESS
    90  MM
  • LIMITING SPEED
    940  RPM
  • WEIGHT
    1890  G
  • DYNAMIC LOAD
    1230  KN
  • STATIC LOAD
    1890  KN
  • PACKAGING
    1
Description

The Self Aligning Roller Bearing, known as 23044RK-H3044-JTEKT JTEKT, has an inner diameter of 200 mm, an outer diameter of 340 mm and a thickness of 90 mm.

EXPERT ADVICE 


What is a self aligning bearing?


 A spherical bearing, or swinging bearing is a bearing that is able to accept that the spindle is slightly out of alignment.   These bearings are regularly located in grinders or agricultural machines, regularly placed in "cast iron SN" bearings, with a shim washer and seals specific to these bearings.   Attention, there are 2 important variants:   • The cylindrical bore bearing, which will be mounted directly on the shaft, in force 
• The tapered bore bearing, mounted with a sleeve, on an axis smaller than the bore of basis of turnover.   The tapered bore is indicated by the letter "K" in the reference. 


What does the letter "K" mean in the reference?


 The letter K means that the bearing has a tapered bore. It should therefore almost always be mounted with a conical sleeve. Attention, this bearing is generally mounted on an axis of 5mm less than the dimension indicated for the bearing.
CUSTOMER REVIEWS
Trustpilot